and uniformly then stitched together into mats with an polyester yarn. 

 

Quick wetting and rapid air release

Even thickness 

Superb integrity

Multi-directional reinforcement

 

This product is used primarily for hand lay-up, pultrusion, RTM, and filament winding process, etc. For its excellent characteristics, it has been used to provide superior performance in a broad range of end-use markets such as marine, transportation, recreation, construction, consumer and anti-corrosion area, typical products are FRP boat hulls, plates, pultruded sections, pipe lining, etc.

Packaging 

Knitted Chopped Combo Mat from Zhongtian Junda, is wound on cardboard tube of 76mm in diameter,  then covered with a polyethylene plastic bag, and packaged with a cardboard box. If packaged with pallet, there should be 16 or 12 cartons placed vertically and 9 or 6 cartons placed horizontally on one pallet. The pallets should be stocked 2 layers high in maximum, the cartons 5 layers high in maximum when stocked .    

Storage 

The product should be stored in dry and cool place where the best condition is temperature 5-35°C and the humidity 35-65°C. Unless use, the package must be kept intact in order to prevent it from the wet. 

Stacking

 To ensure safety and avoid damage to the product, it should not be stacked more than two high.